伊人久久大香线蕉av影院,日韩欧美黄色,夜鲁鲁鲁夜夜综合视频,天堂在\/线中文官网

技術文章/ article

您的位置:首頁  -  技術文章  -  微加工:剝離

微加工:剝離

更新時間:2015-08-06      瀏覽次數:3322

Lift-off process in microstructuring technology is a method of creating structures (patterning) of a target material on the surface of a substrate (ex. wafer) using a sacrificial material (ex. Photoresist). It is an additive technique as opposed to more traditional subtracting technique like etching. The scale of the structures can vary from the nanoscale up to the centimeter scale or further, but are typically of micrometric dimensions.

Process

An inverse pattern is first created in the sacrificial stencil layer (ex. photoresist), deposited on the surface of the substrate. This is done by etching openings through the layer so that the target material can reach the surface of the substrate in those regions, where the final pattern is to be created. The target material is deposited over the whole area of the wafer, reaching the surface of the substrate in the etched regions and staying on the top of the sacrificial layer in the regions, where it was not previously etched. When the sacrificial layer is washed away (photoresist in a solvent), the material on the top is lifted-off and washed together with the sacrificial layer below. After the lift-off, the target material remains only in the regions where it had a direct contact with the substrate.

·       Substrate is prepared

·       Sacrificial layer is deposited and an inverse pattern is created (ex. photoresist is exposed and developed. Depending on the resist various methods can be used, such as Extreme ultraviolet lithography - EUVL or Electron beam lithography - EBL. The photoresist is removed in the areas, where the target material is to be located, creating an inverse pattern.)

·       Target material (usually a thin metal layer) is deposited (on the whole surface of the wafer). This layer covers the remaining resist as well as parts of the wafer that were cleaned of the resist in the previous developing step.

·       The rest of the sacrificial material (ex. photoresist) is washed out together with parts of the target material covering it, only the material that was in the "holes" having direct contact with the underlying layer (substrate/wafer) stays

Advantages

Lift-off is applied in cases where a direct etching of structural material would have undesirable effects on the layer below.

Disadvantages

There are 3 major problems with lift-off:

Retention

This is the worst problem for liftoff processes. If this problem occurs, unwanted parts of the metal layer will remain on the wafer. This can be caused by different situations. The resist below the parts that should have been lifted off could not have dissolved properly. Also, it is possible that the metal has adhered so well to the parts that should remain that it prevents lift-off.

Ears

When the metal is deposited, and it covers the sidewalls of the resist, "ears" can be formed. These are made of the metal along the sidewall which will be standing upwards from the surface. Also, it is possible that these ears will fall over on the surface, causing an unwanted shape on the substrate.

If the ears remain on the surface, the risk remains that these ears will go through different layers put on top of the wafer and they might cause unwanted connections.

Redeposition

During the liftoff process it is possible that particles of metal will become reattached to the surface, at a random location. It is very difficult to remove these particles after the wafer has dried.

Use

Lift-off process is used mostly to create metallic interconnections.
There are several types of lift-off processes, and what can be achieved depends highly on the actual process being used. Very fine structures have been used using EBL, for instance. The lift-off process can also involve multiple layers of different types of resist. This can for instance be used to create shapes that will prevent side walls of the resist being covered in the metal deposition stage.

*Please contact us if there is problem using this passage* 

返回列表

版權所有©2025 那諾中國有限公司 All Rights Reserved   備案號:   sitemap.xml   技術支持:化工儀器網   管理登陸
国产熟女AA级毛片| 大厂| 曰曰摸夜夜添夜夜添高潮出水 | 性色AV一区二区三区| 精品中文字幕一区二区三区av| 国产精品久久久久免费观看| 在线看片无码永久免费视频| 国产精品va在线播放我和闺蜜 | 性色av极品无码专区亚洲| 无码人妻精品中文字幕| 天堂在\/线中文在线资源| 国产午夜草莓视频在线观看| 国产成人亚洲综合网站| 亚洲色图15p| 情趣网站| 人妻合集| 妺妺窝人体色WWW在线下载| 亚洲国产精品VA在线观看麻豆| 无码精品国产一区二区三区免费| 2020国产精品永久在线| 人妻久久精品天天中文字幕| 属鸡人永远最旺的颜色| av老司机在线| av草草久久久久久久久久久| 人妻在线日韩免费视频| 亚洲码欧美码一区二区三区| 乱人伦中文字幕在线| 国产福利一区二区三区在线视频 | 小罗莉极品一线天在线| 色婷婷亚洲婷婷八月中文字幕| 成–人–黄–色–网–站| 精品久久久久久亚洲精品| 99er热精品视频| 人人摸人人操| 亚洲国产中文无线码在线| 国产精品亚洲а∨无码播放不卡| 人人妻人人添人人爽日韩欧美| 无码专区中文字幕无码野外| 亚洲精品无码不卡久久久久| 阳朔县| 大j8黑人bbw巨大怪物|